2FT 48 SPLINE STEERING SHAFT

48 SPLINED BOTH ENDS

Specifications:

Suit MPI & Grant 3 Bolt Steering Wheels

The Sweet Manufacturing three-bolt pattern is the same bolt standard pattern used on most three-bolt steering wheels such as Grant & MPI. Features a gold zinc finish steel collar.

The quick-release hub is SFI 42.1 rated, and includes a splined steering shaft stub that welds over a 3/4 OD steering shaft.

To release the steering wheel, you simply pull in the steel collar. To reconnect the steering wheel you simply push the quick-release hub down onto the stub. You don't have to pull the collar up to reconnect the steering wheel as it simply clicks in on install.

The quick-release adapter is fully re-buildable with snap ring pliers to clean any dirt and debris inside of it.

The three mount bolts are 5/16 diameter x 5/8 long.

Sweet Steering Uni Joint 3/4 Smooth To 3/4 48 Spline Steering Shaft

Specifications:

Maximum Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #06: 3/4" Smooth Bore Weld On
End #10: 3/4" 48 Spline with Set Screw

If you're trying to replace one of Sweet Manufacturing's u-joints and haven't removed it from your vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Below is a list of Sweet Mfg's part numbers.

Each end of the u-joint will have a part number engraved in it. For example, if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 48 spline. 

Sweet Manufacturing Part Numbers (3/4 Uni's Only)

• 06 = 3/4" Smooth Bore Weld On
• 10 = 3/4" 48 Spline
• 12 = 3/4" 36 Spline
• 15 = 3/4" 30 Spline
• 21 = 3/4" 20 Spline

PLEASE NOTE

If you are re-fitting or have never fitted/welded a steering shaft assembly, please read the fitting guide on how to 'time' the U-Joints to each other to prevent bind, and decrease/increase in lengths while turning.

Winters Performance Sidewinder Series

This shifter comes as per the image, in PRN21 pattern to suit a Powerglide 2-speed Transmission. The shifter also comes with a 5-Foot push / pull cable and mounting hardware.

The Sidewinder shifter is Fail-Safe. It's mechanically impossible to accidentally shift into reverse from any forward gear.

A sturdy, steel guard, bars the shifting rod from all other positions except first and second.

When you want reverse, only you can put it there when required. 

Sweet Steering Uni Joint 3/4 48-Spline x 13/16 36-Spline Steering Shaft

Specifications:

Max Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #10: 3/4" 48 Spline With Set Screw
End #11: 13/16" 36 Spline With Set Screw

If you're trying to replace one of Sweet Manufacturing's u-joints and haven't removed it from your vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Below is a list of Sweet Mfg's part numbers.

Each end of the u-joint will have a part number engraved in it. For example, if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 48 spline. 

PLEASE NOTE

If you are re-fitting or have never fitted/welded a steering shaft assembly, please read the fitting guide on how to 'time' the U-Joints to each other to prevent bind, and decrease / increase in lengths while turning.

FORTIN RACING

Fortin Racing's 2.0 Power Rack is a front power steer rack & pinion with a 2.0" ram.

The PR2 2.0 has become the rack of choice for many short course race cars. 

The rack has 4.25" total travel and a 1.5:1 ratio and has a 15" wide spread rack.

Specifications:

Max Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #10: 3/4" 48 Spline With Set Screw
End #15: 3/4" 30 Spline With Set Screw

If you're trying to replace one of Sweet Manufacturing's u-joints and haven't removed it from your vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Below is a list of Sweet Mfg's part numbers.

Each end of the u-joint will have a part number engraved in it. For example, if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 48 spline. 

Sweet Manufacturing Part Numbers (3/4 Uni's Only)

• 06 = 3/4" Smooth Bore Weld On
• 10 = 3/4" 48 Spline
• 12 = 3/4" 36 Spline
• 15 = 3/4" 30 Spline
• 21 = 3/4" 20 Spline

PLEASE NOTE

If you are re-fitting or have never fitted/welded a steering shaft assembly, please read the fitting guide on how to 'time' the U-Joints to each other to prevent bind, and decrease / increase in lengths while turning.

 #6 IN/OUT TO #8 Return

The HOWE relief valve gauge port is 5/16"-24 thread.

This product is used to regulate pressure in your power steering system. It keeps the pressure in the system regulated to a set pressure level and reduces excess load and premature wear on the pump.

The pressure relief valve is also tunable, allowing you to set the pressure to whatever PSI you require. This helps prevent pressure spikes in your power steering system.

Standard setup on a T/C GM power steering pump:

• #6 Pressure in
• #6 Pressure out
• #8 Return to reservoir

Sweet Manufacturing's standard servo control valve

For use with rack and pinions that utilize integrated servos such as Howe Performance, Fortin Racing and Sweet Manufacturing.

When replacing a servo already on your race car, look carefully at the old servo.

Sweet always engraves the torsion bar size into the control valve. The thicker the torsion bar the stiffer your steering will feel. The thinner the torsion bar is, the softer/easier your steering will feel.

Below are the list of tosion bar ratings:

• P = AN #6 Fitting comes from the power steering pump
• T = AN #8 Fitting returns from the control valve back to the reservoir
• L = AN #6 Fitting goes to left side of power steering ram
• R = AN #6 Fitting goes to right side of power steering ram

HOWE Performance

HOWE110-6

HOWE also provide a range of spares for their performance rack and pinions steering solutions. If you're rack is worn, you can rebuild it! Or, we also offer this service in-house at 5PM. 

Email us if you need advice or to find out build costs etc.

HOWE Performance

HOWE110-4

HOWE also provide a range of spares for their performance rack and pinions steering solutions. If you're rack is worn, you can rebuild it! Or, we also offer this service in-house at 5PM. 

Email us if you need advice or to find out build costs etc.

5FT 48 SPLINE STEERING SHAFT

48 SPLINED BOTH ENDS

Specifications:

HOWE Performance Billet Steel Pitman Arm to suit Chevy Sagnaw Steering Box

Sweet Steering Uni Joint 3/4 Smooth To 3/4 36 Spline Steering Shaft

Specifications:

Maximum Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #06: 3/4" Smooth Bore Weld On
End #06: 3/4" 36 Spline

If you're trying to replace one of Sweet Manufacturing's u-joints and haven't removed it from your vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Below is a list of Sweet Mfg's part numbers.

Each end of the u-joint will have a part number engraved in it. For example, if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 48 spline. 

Sweet Manufacturing Part Numbers (3/4 Uni's Only)

• 06 = 3/4" Smooth Bore Weld On
• 10 = 3/4" 48 Spline
• 12 = 3/4" 36 Spline
• 15 = 3/4" 30 Spline
• 21 = 3/4" 20 Spline

PLEASE NOTE

If you are re-fitting or have never fitted/welded a steering shaft assembly, please read the fitting guide on how to 'time' the U-Joints to each other to prevent bind, and decrease / increase in lengths while turning.

Sweet Steering Uni Joint 3/4 Smooth To 3/4 Smooth Steering Shaft

Specifications:

Maximum Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #06: 3/4" Smooth Bore Weld On
End #06: 3/4" Smooth Bore Weld On

If you're trying to replace one of Sweet Manufacturing's u-joints and haven't removed it from your vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Below is a list of Sweet Mfg's part numbers.

Each end of the u-joint will have a part number engraved in it. For example, if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 48 spline. 

Sweet Manufacturing Part Numbers (3/4 Uni's Only)

• 06 = 3/4" Smooth Bore Weld On
• 10 = 3/4" 48 Spline
• 12 = 3/4" 36 Spline
• 15 = 3/4" 30 Spline
• 21 = 3/4" 20 Spline

PLEASE NOTE

If you are re-fitting or have never fitted/welded a steering shaft assembly, please read the fitting guide on how to 'time' the U-Joints to each other to prevent bind, and decrease/increase in lengths while turning.

Sweet Steering DOUBLE Uni Joint 3/4 Smooth To 13/16-36 Spline Steering Shaft

Specifications:
Max Operating Angle: 80 Degrees
Material Type: Steel
Finish: Black Oxide
End #06: 3/4" Smooth Bore Weld On
End #11: 13/16" 36 Spline With Set Screw

If you're trying to replace one of Sweet Mfg's u-joints and haven't removed it from the car/truck/vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

PLEASE NOTE

If you are re-fitting or have never fitted/welded a steering shaft assembly, please read the fitting guide on how to 'time' the U-Joints to each other to prevent bind, and decrease / increase in lengths while turning.

 #8 PRESSURE IN/OUT TO #10 Return

The HOWE relief valve gauge port is 5/16"-24 thread.

This product is used to regulate pressure in your power steering system. It keeps the pressure in the system regulated to a set pressure level and reduces excess load and premature wear on the pump.

The pressure relief valve is also tunable, allowing you to set the pressure to whatever PSI you require. This helps prevent pressure spikes in your power steering system.

Standard setup on a T/C GM power steering pump:

• #8 Pressure in
• #8 Pressure out
• #10 Return to reservoir

Sweet Steering Uni Joint 3/4 Smooth To 3/4 36 Spline Steering Shaft

Specifications:

Maximum Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #10: 3/4" 48 Spline With Set Screw
End #12: 3/4" 36 Spline With Set Screw

If you're trying to replace one of Sweet Manufacturing's u-joints and haven't removed it from your vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Below is a list of Sweet Mfg's part numbers.

Each end of the u-joint will have a part number engraved in it. For example, if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 48 spline. 

Sweet Manufacturing Part Numbers (3/4 Uni's Only)

• 06 = 3/4" Smooth Bore Weld On
• 10 = 3/4" 48 Spline
• 12 = 3/4" 36 Spline
• 15 = 3/4" 30 Spline
• 21 = 3/4" 20 Spline

PLEASE NOTE

If you are re-fitting or have never fitted/welded a steering shaft assembly, please read the fitting guide on how to 'time' the U-Joints to each other to prevent bind, and decrease / increase in lengths while turning.

Sweet Steering Uni Joint 3/4 Smooth To 3/4 30 Spline Steering Shaft

Specifications:

Maximum Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #06: 3/4" Smooth Bore Weld On
End #10: 3/4" 30 Spline with Set Screw

If you're trying to replace one of Sweet Manufacturing's u-joints and haven't removed it from your vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Below is a list of Sweet Mfg's part numbers.

Each end of the u-joint will have a part number engraved in it. For example, if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 48 spline. 

Sweet Manufacturing Part Numbers (3/4 Uni's Only)

• 06 = 3/4" Smooth Bore Weld On
• 10 = 3/4" 48 Spline
• 12 = 3/4" 36 Spline
• 15 = 3/4" 30 Spline
• 21 = 3/4" 20 Spline

PLEASE NOTE

If you are re-fitting or have never fitted/welded a steering shaft assembly, please read the fitting guide on how to 'time' the U-Joints to each other to prevent bind, and decrease/increase in lengths while turning.

6-Feet Length of 4130 Steering Tube for Steering system fabrication.

Price listed is for the full 6-Foot Length.

The Blitzkrieg steering column features a machined 2" OD outer sleeve that contains 2 sealed bearings.

The inner shaft tapers down to 3/4" to accept most steering wheel adapters.

The output side of the shaft is splined to accept ¾"-48 universal joints, and is also threaded to adjust the tension on the assembly.

This assembly is super reliable, and easily rebuildable.

Suit Momo, Sparco, NRG & MPI Steering Wheels

The six bolt pattern is the same standard pattern used on most six bolt steering wheels such as Momo, MPI, NRG, and Sparco USA.

Featuring a red anodized finish, the quick release is SFI 42.1 rated and includes a splined steering shaft stub that welds over a 3/4 OD steering shaft.

To release the steering wheel, simply pull up on the aluminum collar. To reconnect the steering wheel you simply push the quick release hub down on to the stub.

The quick release adapter can be fully disassembled with snap ring pliers to clean any dirt and debris inside of it.

The six allen bolts that fix the steering wheel are 3/16 (10-32) diameter 1/2 long.

HOWE Performance

Howe Performance heavy-duty Truggy front steer power rack & pinion.

This rack features a 2.75" ram, has 6.0" of travel, and a 1.5 to 1 ratio. This unit is ideal for buggies and trucks running 37 and 39' Tyres.

This rack is a widespread rack.

HOWE PERFORMANCE POWER RACKS

Howe's front steer power rack & pinion for a-arm buggies from their Medium Duty Power rack range.

This power rack features a 2.5" ram, has 4.5" of steering travel, and a 1.5 to 1 ratio. This unit is the ideal steering solution for buggies.

Available with and without a control valve servo.

This rack is a widespread rack which includes the control servo

HOWE PERFORMANCE POWER RACKS

Howe's front steer power rack & pinion for a-arm buggies from their Medium Duty Power rack range.

This power rack features a 2.5" ram, has 4.5" of steering travel, and a 1.5 to 1 ratio. This unit is the ideal steering solution for buggies.

Available with and without a control valve servo.

This rack is a widespread rack.

Chevy Saginaw Steering Box

Not only do Howe produce world-class rack and pinion steering solutions for off-road racing, they also produce world-class steering boxes for specific types of applications where a rack cannot fit.

Steering Box features:

• 700 Series
• 3 Bolt
• 32 Spline 1.250" Steering Shaft
• In-built steering servo
• 3 x Dash 6 fittings (pressure in, L&R out)
• 1 x Dash 8 fitting for return
• 3/4" 26 spline steering uni shaft