Internal Snap Ring For Our 1" 9044 Series Uniball Cups

1/2 UNF 12 Point Bolts

170,000 Tensile Strength.

Made from 8740 alloy steel. Aircraft quality steel and the same bolts used in Connecting Rod applications and will resist being stretched, deformed, or sheared in heavy applications or high-stress loads.

3/4 UNF 12 Point Bolts

170,000 Tensile Strength.

Torque setting 145 ft pnds with lube, made from 8740 alloy steel. Aircraft quality steel and the same bolts used in Connecting Rod applications and will resist being stretched, deformed or sheared in heavy applications or high-stress loads.

We always recommend a NAS washer to be used under the heads

12 Point Grade 9 Bolt

170,000 Tensile Strength.

Made from 8740 alloy steel. Aircraft quality steel and the same bolts used in Connecting Rod applications and will resist being stretched, deformed, or sheared in heavy applications or high-stress loads.

Full Shank CV Bolts

5PM CV Bolts are specialized bolts made specifically for CV Joints. These bolts feature a smaller head (uses a 7/16 Socket to tension) so the bolt head does not tear the CV boot and increases clearance. 

The full shank ensures maximum tolerance and smooth contact with CV bolt hole.

5FT 48 SPLINE STEERING SHAFT

48 SPLINED BOTH ENDS

Specifications:

6.5" Diameter

Always use a pulley installer to intall pulleys on your pump, or we can install one for you.

NYLON 4-PLY TOUGH STICHING AND CONSTRUCTION

Quad 4-Ply Limit Straps. Select your length from the dropdown list.

Limiting strap length is measured from center of bolt hole to center of bolt hole. The strap's webbing material has a rating between 14,000 to 15,000 pounds. The 4130 chromoly ends are rated to 15,000 pounds.

Limit straps are a must for any off road application to prevent damage to your suspension and drive train components.

Without limit straps, your shocks act as limit stops at max droop which can cause damage from your vehicle's unsprung weight. Limiting straps also prevent damage to your CV joints by limiting the amount of maximum angle on your axles. The limit straps we carry are four-ply and1" of stretch is allowed for every 12" of strap.

Porsche 930 CV Leather Boot

Strong stiching with high quality leather to protect your CV joints

Oil Seal 2" Hollow Spindle Hubs

High-Quality Oil Seal to suit the 2" Hollow Spindle Tapered Bearing Kit.

For a Full Hub Bearing Kit to suit 1 x Hub you will need:

2 x LM104949 TAPERED BEARINGS

2 x LM104911 TAPERED BEARING CONES

1 x 24897 HUB SEAL

1 x TUBE PRO-MA CAULKING GUN GREASE

Billet Power Steering Reservior

The hole in the top of the cap is not drilled all the way through in case you don't intend to run the pressure relief valve.

1-Quart (950mls) capacity not including the oil filter's volume.

AN #8 return, AN #10 out to pump.